Full Featured Data Acquisition System – Pico Petite

PicoPetite – 5.08 cm L x 5.92 cm W x 2.79 cm H

  • Extremely Small Size, High Speed, Reliable
  • 8 to 64 Analogue Channels
  • Individual 16-bit A/D Converters
  • Individual 0, 2.5, 5, and 10V Excitations
  • 8 Events Channels (plus 4 Events per 8-channels added)
  • 4 Digital Outputs
  • 1Hz to 250KHz Sampling Rate
  • 16 to 256 GB of Non-volatile System Memory

Complete the form below to request a quote

Or call us on +61 7 3868-4255

  • This field is for validation purposes and should be left unchanged.

Here’s how to receive a quote for this product

  1. Complete the quote form and submit

  2. A friendly expert will contact you shortly after to discuss your personal needs

  3. We will provide you a simple but comprehensive quote on what it will take to build your Custom Design

It only takes a minute to complete the first step. Start now!

Full Featured Data Acquisition System – Pico Petite

The EME PicoPetite is one of the most compact, full featured Data Acquisition System (DAS). This DAS measures only 5.08 cm (length) by 5.92 cm (width) by 2.794 cm (height). It also weighs less than 141 grams for 32 channels. As a result, additional channels can be added or removed in 8 channel increments. Which means adding or subtracting only 0.55cm per 8 Channels to the height dimension. Therefore, up to 64 channels can be installed in a single unit. Consequently, units can be daisy chained together for extremely high channel counts. In conclusion, EME has sacrificed no features to achieve this small size. The PicoPetite uses many of the design features of the highly successful EME PicoDAS.

Features:
  • Configurations of 8, 16, 24, 32, 40, 48, 56, and 64 analogue channels available
  • Airborne ™ Miniature DSub Connectors
  • Synchronous triggering and simultaneous sampling between daisy chained units
  • Simultaneous Sampling of 1 Hz to 250 kHz
  • Individual 16-bit A/D converters for each channel
  • Gain range of 1 to 10000
  • Analogue Input of +/- 5 volts
  • ICP Module allows any Analogue Input to accept ICP Sensors (28 Volt @ 3.6 ma with Adjustable High Pass Filter (Optional))
  • Offsetting available for the full scale at the Input or at the Output
  • .1% calibrated accuracy
  • Internal shunt calibration
  • Internal 1/2 pseudo bridge completion resistors for all channels (user selectable)
  • Simultaneous sampling of channels
  • Individual fold-back current limited excitation sources of 0, 2.5v, 5.0v, and 10.0v for each analogue input. Current limit can be customer set or delivered as 100ma standard.
  • 6 pole Digital filtering with variable cut-off frequencies
  • 5 pole Fixed Butterworth filter @ 25kHz (Other frequencies available)
  • Meets SAE J211 specifications
  • Sensor identification using DALLAS ID’s (Optional with 51-pin Connectors)
  • Automatic calibration of analog channels
  • Multi-stage sampling offering the sample rate to change up to 3 times at a set time or on the fly with an event line
  • Start/Stop Data Recording using an event line
  • Segmented Data Collection Mode offers the ability to collect multiple acquisitions under one arming.
  • Gain Measurement and Excitation Measurement while sensors are connected
  • Battery input measurement and current monitor recording during acquisition
  • 8 GB, 16 GB, 32 GB, 64 GB, 128 GB or 256 GB of non-volatile memory
  • 4 digital output channels
  • 8 digital event input channels (Plus 4 Events per 8-channel Analogue Module)
  • PCM Irig-B Input as well as PCM 106-01 Telemetry Output (Optional)
  • Internal GPS Module (Optional)
  • 10-16.5 volt power input range
  • Internal Digital NiCAD/NiMH Peak Charger with automatic switching (Optional)
  • Low power consumption .250 amps for 32 channels at 12 volts in full analogue mode
  • Serial communication using Ethernet 100baseT
  • Durability of Shock:

    +/-250g, 12 msec 1/2 sine wave pulse

    +/-70g, 500 msec 1/2 sine wave,

    +/-35g, 2 sec 1/2 sine wave,

    +/-60g 100 msec duration, on all axis

  • Windows XP/Vista/7/8 32-bit or 64-bit ™ Control/Processing Software
  • EMI/RFI Shielding
  • 1 year warranty

For more information on the Pico Petite – full featured data acquisition system , contact us.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.