XVME-6700 Air-Cooled: 6U VME Single Board Computer with Intel® Celeron 200E
The Acromag XVME-6700 is an air cooled 6U VME Single Board Computer with the following features.
- Celeron-based board for cost-sensitive applications
- FPGA-based VME to PCIe bridge
- Intel 8-Series QM87 PCH chipset
- Up to 1.50GHz CPU
- Up to 16GB DDR3L ECC RAM
- Dual PMC/XMC Sites
If you’re one of the thousands who depends on the continued use of your VMEbus systems. This single board computer updates your legacy systems. With an Intel processor that will deliver an enhanced micro architecture, integrated graphics, and expanded memory performance with 8 GB of high-bandwidth DDR3L memory and ECC memory controllers.
The XVME-6700 will add 7 to 10 years of life to your system with modern technology. This high-performance Single Board Computer features a FPGA-based VME to PCIe-bridge that solved the end of life issue with the TSI148 VME interface chip.
Performance Specifications
- Processor: Intel® Celeron® Processor 2002E (2M Cache, 1.50 GHz)
- Chipset: Intel 8-Series QM87 PCH chipset. Intel DH82QM87 Platform Controller Hub
- Memory: 8GB of 1600 DDR3L ECC memory
- Flash Memory: 8GB standard
- Software Support: VxWorks, Linux and Windows 7+
Bus Compliance
- VMEbus Interface: P1 and P2 connectors are compatible with VME67x VME Master/Slave using FPGA-based VME to PCIe bridge. A32/A24/A16/D32/D16/D8, MBLT64, 2eVME/2eSST
- Dual PMC/XMC Sites: 32/64-bit, 33/66/133MHz sites (IEEE P1386/P1386.1)
- Front panel I/O bezel and P4 module user I/O on optional P0 rear connector and P2 connector. (XMC module P16 connector I/O optionally available on P0 connector, please consult the factory).
- XMCs are PCIe x8
- Option to replace PMC/XMC #2 with the XBRD-9060
System Integrity
A two-digit LED display is available for power-on self test (POST) codes for problems during the boot operation. It can then be used for application software user codes to aid in software debugging.
Form Factor
6U VMEbus 233mm x 160mm
Optional Expansion
XBRD-9060 – Allows more I/O to the front panel, as well as mSATA SSD modules to be added for storage. Front panel I/O available are Gb Ethernet, RS-232 serial port, and two USB ports.
The XBRD-9060 also contains two mSATA sockets that allow two SSD drives to be added while still remaining within a single VME slot. Using the software RAID functionality of the QM87 PCH, these drives can even be setup as a RAID 0/1 array if redundancy or extra speed is desired.
XVME-9640
Installed onto the rear slot directly behind the XVME- 6700 to easily access all of the available I/O on the P2, and optionally P0 connectors, as well as allow mSATA SSD modules to be added for storage. Front panel I/O available are two Gb Ethernet ports, one VGA port, one DVI-D port, and two USB ports. Internal connectors are also available. Please see the user manual for more information.
Environmental
Operating temperature: Standard temperature models: 0 to 70°C*. Extended temperature models: -40 to 75°C* * application dependent – see manual for details
Storage temperature: -55 to 85°C
Relative humidity: 5% to 95% at 60°C non-condensing
Power Inputs from backplane: Dual Core Celeron. 5V (5V only backplane): 53W typical to 53W maximum, 37.5W typical. 5V (5V +3.3V backplane): 50W typical to 50.5W maximum, 35W typical. 3.3V (optional): 3W +/-12V: Used only for PMC/XMC
Click on the brochure tab for detailed specifications or contact us.
Reviews
There are no reviews yet.