Key Features of the QMC350 20-Channel 16-Bit Analog Input Module (VITA 93)
20 differential analog input channels
±10V or 0–20mA input ranges (software-selectable)
16-bit resolution for precise measurement
Up to 250kHz aggregate throughput
Simultaneous sampling supported
Low-noise, low-drift architecture
Channel-by-channel build
VITA 93 mezzanine standard compliant
Works with Acromag QMC carrier cards
Over-voltage and ESD protection
Rugged design perfect for harsh environments
Low power consumption
Applications of the QMC350 20-Channel 16-Bit Analog Input Module (VITA 93)
Defence & aerospace systems
Industrial automation
Transportation and asset monitoring
Test & measurement platforms
Research, labs & simulation
Condition monitoring
Embedded computing I/O expansion
Edge data acquisition systems
Technical Specifications
| Specification | Detail |
|---|---|
| Channels | 20 analog input (single-ended or differential) |
| A/D Converter | 16-bit, one per channel (simultaneous) |
| Sampling Rate | Up to 1 MSPS per channel (simultaneous) |
| Input Ranges | Single-ended: 0–5 V, 0–10 V, 0–12.5 V, ±2.5 V, ±5 V, ±6.25 V, ±10 V, ±12.5 V; Differential: ±5 V, ±10 V, ±12.5 V, ±20 V |
| Input Impedance | 1 MΩ |
| Input Protection | ±21 V input clamp protection |
| Bandwidth Options | 25 kHz or 220 kHz (software selectable) |
| Form Factor / Standard | VITA 93 mezzanine, 26 × 78.25 mm single-width module |
| Interface | PCIe via carrier card / 80-pin connectors |
| Operating Temp / Cooling Options | Air-cooled: 0–70 °C; Conduction-cooled: –40 to +85 °C |
| Physical Dimensions | 78.25 mm × 26.00 mm × 11.00 mm |
| Typical Power (Module Only) | +3.3 VDC: ~1.28 A; Aux +3.3 VDC: ~0.02 A; +12 VDC: ~0.278 A (actual depends on carrier) |
Certifications & Compliance
VITA 93 mezzanine standard
CE / FCC compliant (per carrier board certification)
RoHS compliant
Designed for rugged industrial & defence applications
Installation & Setup
Requires a compatible QMC/VITA 93 carrier board
Supports front-panel or backplane I/O routing
No external power required — powered via carrier
Suitable for high-vibration and extended-temperature systems
Acromag software available for Linux, Windows & VxWorks
Ordering & Lead Times (Metromatics)
Metromatics is the authorised Acromag distributor for Australia and New Zealand.
Lead times vary depending on your desired solution. Contact us for pricing, stock availability, and integration advice.
Why Metromatics
35+ years supporting defence, transport & industrial markets
Local expertise in data acquisition, embedded computing & rugged electronics
Engineering-level support and custom solution capability
Fast response times and trusted service across AU/NZ
FAQs
1. Does the QMC350 support both voltage and current inputs?
Yes — each channel can be made for ±10V or 0–20mA.
2. Do I need a carrier board?
Yes, it must be installed on a VITA 93/QMC carrier such as those provided by Acromag.
3. Can it be used in rugged environments?
Yes — the QMC350 is designed for military, industrial, and high vibration applications.
4. What software support is available?
Acromag provides driver libraries and utilities for Linux, Windows, and VxWorks.
5. Is simultaneous sampling supported?
Yes — This is perfect for synchronised multi-sensor acquisition.
Want to know more?
If you want to know more about choosing the right high-speed analog input module for your application check out our guide here. You can also contact us to know more about this product or our range of embedded computers.
