Ethernet Analog Output Modules 972EN 973EN

The 972EN and 973EN Modules provide up to six channels of analog output. These multi range outputs support a variety of industrial devices. They drive displays, recorders, control drives or send analog signals to other systems.

With three way isolation, high resolution, low noise and D/A converters delivering high accuracy and reliability to industrial applications.

The Acromag 972EN and 973EN are 6 Channel Ethernet Analog Output Modules.

Firstly, the 972EN is DC Current. It has ranges selectable on a channel to channel basis: 0 to1mA, 0 to 20mA or 4 to 20mA.

Where as, the 973EN is DC Voltage. It has ranges selectable on a channel to channel basis: 0 to1V, 0 to 5V or 0 to10V DC.

Secondly, the network communication consists of EtherNet/IP, Modbus TCP/IP with i2o peer to peer available for the Modbus TCP/IP only. With 10/100Mbps with automatic data rate negotiation. A 15 to 36V DC power supply is required with 4.6 Watts for the 972EN or 2.3 Watts for 973EN.

Features of the Ethernet Analog Output Modules 972EN 973EN include:

  • Standard web browser configurable
  • 6 output stand alone modules has a lower start up cost than multi piece block I/O systems
  • Universal DC output support a wide variety of signals and industrial devices
  • Three selectable fail safe modes (0%, last state or predefined) help prevent unsafe conditions
  • Wide operation temperature range for installation in extreme environments 972EN -25 to 60°C 973EN -25 to 70°C


Finally, for more information, contact us.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.