Measurements using Industrial Sensors

Measurements using Industrial Sensors IOLITEr-8xLVe

The Dewesoft IOLITEr-8xLVe is the perfect solution for measurements using industrial sensors.  Firstly, it is a high channel Data Acquisition device. Along with easy sensor connectivity.  It provides a high-power sensor supply that is applicable to some types of current sensors.

Secondly, test engineers use it for synchronised high dynamic measurements. The supported measurement modes include Voltage, Current and Potentiometer measurements. The IOLITEr-8xLVe has two input ranges of +/-100 V and +/-5 V.  As well as unipolar excitation and TEDS Support.  This provides the flexibility to work with different industrial sensors. Such as pressure sensors, potentiometers, and MEMS accelerometers.

Thirdly, the IOLITEr-8xLVe contains 8 channels.  Data is acquired simultaneously from all with a sampling rate of up to 20 kS/sec.  The module uses a 24 bit sigma delta analog to digital converter with an antialiasing filter. Protection from external spikes is provided by Dewesoft’s reliable channel to ground isolation.

Additionally, the module is available with D-SUB37 and a terminal block connector.  Suitable for all IOLITE standard chassis.

To find out more about this great product, contact us.

D37 Pin Out
D37 Pin Out
IOLITEr-8xLVe D37 Sub connector
D37 Connector
IOLITEr-8xLV3 pin out
Front of Measurement of Industrial Sensors Module
Front of IOLITEr-8xLVe
PWR Out Socket
PWR OUT pin out

Caution: PWR OUT pins are used to supply external loads.  Do not connect the external power supply to PWR OUT pins! It can damage the equipment.  The current limit of the PWR OUT source is 2 A per module.  The current limit of the IOLITE system is 16A!