The AcPC330 is an Analog Input CompactPCI Board that provides fast, high resolution A/D Conversion. It contains 16D/32SE input channels, ±5V, ±10V, 0-5V and 0-10V input ranges plus a 16-bit A/D Converter with 8µS conversion time at 125KHz.
Ideal for high performance Embedded Computing Applications.
Series 6000 analog I/O modules condition, amplify, filter and digitise signals from any transducer. All modules have a conditioner & amplifier per channel. Additionally, nearly all modules allow individual setting bridge completion, shunt calibration, transducer power and gain per channel.
The AP730 Series is an AcroPack® Module that is a Multi-function mezzanine module that provides a variety of I/O functions on single plug in card. I/O functions such as Analog Input, Analog Output, Digital I/O, Counters/Timers all on a PCIe Bus Interface. It also provides high speed and resolution A/D and D/A Conversion.
Designed for COTS applications where general purpose I/O modules deliver high speed and resolution for a range of I/O functions.
CAN-MD is a sensing approach where data is analysed and processed at the source (by the sensing product) and only the outcomes or Condition indicators are sent on for further action.
The 4139 is a current source power unit / signal conditioner designed specifically for airborne flight testing. It operates from +28 VC aircraft power. It measures 15.88 x 10.1 x 2.61 cm and weighs 331 grams.
The 6010U 3U Rack Mount Enclosure is an enclosure for 4 I/O modules. As a result, it has 4 slots for Series 6000 input and output modules. It also comes with a Universal Serial Bus (USB2.0) computer interface for programming, control and data output.
The 6000U 8U Rack Mount Enclosure is an enclosure for 16 I/O modules. It has 16 slots for Series 6000 input and output modules and comes with a Universal Serial Bus (USB 2.0) computer interface for programming, control and data output. Users that require larger systems can combine 32 enclosures using USB 2.0 hubs or a computer with multiple USB 2.0 ports.
Impact force measurements on small to medium structures has never been easier! Our lightweight impact hammer with a low head weight of 28 grams accurately measures the excitation response of the test structure.
Applications for this product include:
Used in a dynamic structural testing system for modal analysis.
Series 2300 is an IEPE Probe-Style Pressure Sensor designed for reliable operation in temperatures up to 121°C. It is acceleration compensated. Reducing risk of ambient vibration signals adding to the signal output. Therefore, enhancing transducer’s natural frequency which allows an ultra fast rise time.
Applications for this product include:
Model 2200V1 is a probe style miniature IEPE pressure sensor with a sensitivity of 50mV/psi. It is designed to measure phenomena over frequency ranges of 1 Hz to 100 kHZ and higher.
Applications for this product include: