Network Repeaters RS-485

Network Repeaters RS-485

Acromag’s RS-485 network repeater is designed for Johnson Controls’ N2 and BACnet MS/TP bus. This device allows users to take full advantage of the RS-485 standard’s extended communication distances and multi-dropping capabilities.

In addition, these devices offer field selectable End-of-Line Network (EOLN) terminations on both the A and B networks.  Up to thirty-two RS-485 devices can be driven. Network repeaters are ready to mount on any base plate.

Complete the form below to request a quote

Or call us on +61 7 3868-4255

  • This field is for validation purposes and should be left unchanged.

Here’s how to receive a quote for this product

  1. Complete the quote form and submit

  2. A friendly expert will contact you shortly after to discuss your personal needs

  3. We will provide you a simple but comprehensive quote on what it will take to build your Custom Design

It only takes a minute to complete the first step. Start now!

Categories: , , , Tags: , , , , ,

RS-485 Network Repeaters

Acromag’s Model 4683 is a RS-485 network repeater device. Firstly, it allows users to take full advantage of the RS-485 standard’s extended communication distances and multi-dropping capabilities. In addition, these devices offer field selectable End-of-Line Network (EOLN) terminations on both the A and B networks.

Secondly, operation is transparent to all devices. No handshaking is required. Up to thirty-two RS-485 devices can be driven. Network repeaters are ready to mount on any base plate. Or, for a harsh environment, it can be installed in a NEMA enclosure of your choice. No enclosure is necessary for use in a laboratory or office. Installation requires mounting, connecting power and cables, and setting the baud rate.

Model 4683-TTM-xF network repeaters isolate and boost RS-485 signals. Allowing communication signals to travel another 1219 Metres. Each repeater permits the addition of another 32 unit load to a network.

The repeater has two RS-485 “sides” known as the A and B sides. The A side typically connects to the network towards the host and the B side connects to the extended network. Functionally, the A and B sides are equivalent.

Repeaters receive AC power through a 3-screw terminal strip. Transient signal protection is provided on both RS-485 sides.

When both RS-485 lines are idle, each side is in receive mode. When a ‘1’ to ‘0’ transition is detected (signifying a start bit) on either side, the opposite side’s transmitter is enabled. The transmitter stays enabled for one character’s time (based on the baud rate switch setting).

Features of the RS-485 Network Repeater includes:
  • Designed for use with Johnson Controls N2 or BACnet bus.
  • I/O signal isolation. No handshaking. No extra control lines.
  • Baud rates of 600, 1200, 2400, 4800, 9600, 19.2K, 38.4K, and 76.8K are switch selectable.
  • Field-selectable end-of-line network terminations on both A and B sides.
  • Electrical transient protection is provided. This protects the host computer from destructive noise spikes and other transient signals.
  • Status LED’s indicate transmission direction, RS-485 bus fault conditions, and power applied.
  • 115V, 230V, and 24V AC power models available.

Click on the Products Brochure tab for specifications. Or contact us for more information.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Acromag Distributed IO & Signal Conditioners

4683-TTM RS-485 to RS-485 Network Repeater

Related products