Vibration Sensors

For standard measurements or single axis modal analysis, we recommend the I1T-50g-1 and isolated triaxial I3T-50G-1 IEPE cube accelerometer with a 50 g range.  However, if you need to measure vibrations outside this range we recommend the the I1AI-500G-1.  That’s because this miniature accelerometer measures vibrations up to 500g.

Accelerometers also come with TEDS smart sensor interface.  In addition to this, Dewesoft software automatically detects sensors and sets the correct scaling.  Finally, all Dewesoft vibrations sensors are fully compatible with their vibration shakers line.

Industrial Accelerometers

To make things convenient, case isolated sensors work with non-isolated amplifiers.  As a result they don’t need ground loops.  The I1TI-50G-2 IEPE sensor is perfect for industrial applications thanks to its rugged case and connector.  Meanwhile, the I3TI-50G-1 is a standard triaxial sensor with to 50g range.  In contrast, the I1TI-500G-1 single axis accelerometer measures up to 500g while the C1T-50g-1 charge accelerometer works in high-temperature environments up to 190 deg. C.

Modal Impact Hammer

Complementary to vibration sensors the IH-441N-1 modal hammer has a range of up to 440N.  It is also perfect for modal analysis applications that use the Dewesoft software.  The modal hammer also comes with TEDS smart sensor interface. Finally, the Dewesoft X software automatically detects the sensor and sets correct scaling.

Angle Sensors

Angle sensors measure the rotational angle and velocity. To do this, sensors connect to a counter input on SIRIUS, MNITAURs or DEWE-43.  Examples of angle sensors include:

• DS-TACHO1 is an isolated tacho sensor.  It has a variable threshold and up to 100 V input signal.
• DS-TACHO2 is an optical tacho sensor for up to 1 m distance and 4 kHz bandwidth.
• DS-TACHO3 is a long-range laser tacho probe for up to 7.5 m distance and 4 kHz bandwidth.
• DS-TACHO4 is a high-frequency tape and tacho laser probe for up to 100 kHz bandwidth and 2-5 mm distance.

• Vibration Sensors: High-quality IEPE and charge based accelerometers used in lab and industrial environments.
• Modal Hammer: Modal hammer complements sensor set for structural analysis.
• Angle Sensors: A range of tacho and tape angle sensors are great for applications like order tracking, rotational and torsional vibrations.
• TEDS: IEPE accelerometers and modal hammers feature TEDS chip for sensor detection. Simply connect the sensor and measure.