Counter Encoder and Valve Control Sensors

Dewesoft have expanded the IOLITE Industrial Data Acquisition product range further with two modules.

IOLITE-4xCNT is a 4-channel counter encoder (or waveform timing or gear tooth sensor) module, suited for applications like balancing, order tracking and torsional vibrations in vehicle applications.

IOLITE-8xDI-4xDO  is a perfect digital input/output combo module for demanding industrial applications such as valve control, with a maximum sink current 0.5A and maximum switching voltage of 50 V.

 

4 Channel SuperCounter DAQ Module – IOLITE-4xCNT

IOLITE-4xCNT is a 4-channel counter module.  Each channel is capable of 3 x digital inputs, 1 x event counter, encoder, period, pulse-width, duty-cycle, and precise frequency and angle measurement using patented SuperCounter® technology.   Watch the video below to learn how it works.

Supported counter modes are counting, waveform timing, encoder, and gear-tooth sensor.

Additionally, IOLITE-4xCNT also offers a sensor supply (+5 V/100 mA, +12 V/50 mA).

The input connector of IOLITE-4xCNT is a Lemo 1B 7-pin (EEG.1B.307.CLNY) or optionally terminal block input connector (OMNIMATE Signal SL Series SL 2.50/09/90G).

Counter inputs are a perfect choice for applications like balancing, order tracking, and torsional vibrations.

You can check full technical specifications on the IOLITE tech specs page.

Digital Input/Output DAQ Module – IOLITE-8xDI-4xDO

Input Output Module for Valve Control with IOLITE DAQ System

IOLITE-8xDI-4xDO is a perfect digital input/output combo module for industrial applications.

The module offers 8 digital input and 4 digital output channels. Firstly, Digital IN and OUT banks are isolated from each other and can be powered by separate external power supplies.

Additionally, non-isolated supply voltage.  However, current limit 2 A used from PWR OUT pins.

The input connector of IOLITE-8xDI-4xDO is a terminal block OMNIMATE Signal SL Series.

IOLITE-8xDI-4xDO is your choice for more demanding industrial applications such as valve control, with a maximum sink current 0.5 A and maximum switching voltage 50 V.

In conclusion, you can check full technical specifications on the IOLITE tech specs page.

Finally, to learn more about these two great products from Dewesoft, contact us.

Leave a Reply

Your email address will not be published.