Point to Point Wireless I/O Modules

ACROMAG’s New Point-to-Point Wireless I/O Modules are Ideal Solution when a Hard-Wired Interface is Cost-Prohibitive

 Acromag’s new hassle-free wireless I/O replicates analogue, discrete, or Modbus® signals at remote locations.

Acromag broadened their new Vertu™ brand of innovative instrumentation with the release of the VWB2000 signal wire replacement system in a rugged NEMA 4X/IP68 industrial housing. Firstly, this point-to-point wireless signal bridge takes analogue, discrete, or Modbus signals at one location and reproduces them at a second location.

In addition, this system consists of two pre-paired transmitter/receiver units that have a range of 1.6km outside or 152.4mts indoors at industrial environments. This range can be extended using wireless repeater units or high-gain directional antennae. An LCD display provides signal strength and other diagnostic information.

Configuration of Wireless I/O Bridge

Also the  VWB2000 wireless I/O bridge is easy to set up and install. Each unit has one analogue I/O channel, four discrete I/O and Modbus communications.  They are field-configurable in minutes using the push-button controls. Free Windows® software simplifies configuration on a PC via USB and enables advanced features such as encryption and analogue signal calibration. The weather-tight enclosure is cast aluminium with a glass window and a corrosion-resistant powder coating for field mounting. Units can mount directly to a supporting conduit or securely to pipes and walls.

Each unit has both inputs and outputs for bi-directional communication. Analog inputs accept 4-20mA, 0-5V, 0-10V, or 1-5V signals. Analog output is 4-20mA. Digital I/O channels support 0-5V TTL logic levels. Modbus RTU serial communication is EIA-485 compatible.

This wireless I/O bridge provides an effective solution to interface signals from Point A to Point B where it is not practical to run long wires or conduit

Acromag, a mid-sized international corporation, has been developing and manufacturing measurement and control products for more than 60 years. They offer a complete line of industrial I/O products including process instruments, signal conditioning equipment.

Finally, for more information on this Point to Point Wireless I/O Modules System, contact us.

Leave a Reply

Your email address will not be published. Required fields are marked *