The Acromag ARCX1100 is SFF Embedded Computer System. Firstly, this rugged small form factor computer is ideal for Defence and Industrial Applications. With a real focus on signal processing, communication and control functions. Which is a combination of a carrier card which hosts COM Express Type 10 CPU plus a mix of AcroPack I/O Modules to support those functions.
Secondly, the front ports of SFF Embedded Computer System offer easy access to Gigabit Ethernet, USB, Video and COM Signals. Plus the ARCX1100 aligns itself as the perfect portable communication system. This is because it has the ability to add A/D, D/A, discrete I/O, RS-232, RS-485, CAN bus, Ethernet, FPGA, MIL-STD-1553 and other signal interfaces.
The ability to eliminate internal cables between the I/O Modules is another highlight. This achieved by using the AcroPack I/O Modules which are a rugged alternative to mini PCIe. There are more than 25 different varieties of AcroPack Models to meet your I/O requirements.
Some typical deployable systems applications include: vetronics, C4ISR, payload management and command and control for drones and robotics.
Performance Specifications of the ACX1100 SFF Embedded Computer
|Compatability||Provides an electrical and mechanical interface for an industry standard COM Express Type 10 Mini (55mm x 84mm) CPU module.|
CPU module must have four PCIe lanes configured as an x4 port.
|CPU Option||Intel® Atom™ E3950 quad-core, 1.6/2.0GHz (Turbo), 4GB RAM, 12W.|
|Interface||COM Express module provides CPU, memory, PCIe bus, SATA, USB, serial communication, graphics, and other computing functions|
|PCIe Switch||9-port 12-lane PCIe Gen 2 switch expands the single host PCIe x4 port to 6 independent x1 ports (one for each AcroPack site and one for each Ethernet controller).|
|AcroPack / Mini PCIe Expansion I/O||Four slots for plug-in I/O modules. Two isolated slots. Field I/O routed to 68-pin VHDCI connectors.|
|Ethernet Interfaces||Two Intel i210 Gigabit Ethernet Controllers. Two RJ-45 ports supporting 10/100/1000BASE-T.|
|Data Storage||M.2: Expansion site supports SATA III devices, speeds up to 6Gb/s. Accepts 2242, 2260 and 2280 SSD Socket 2/3 (mechanical Key B/M) modules.|
|SATA||Data and power connectors for use of a Solid-State Disk Drive. Supports SATA III devices, speeds up to 6Gb/s.|
|Serial Communication||Two ports with standard UART (RX/TX) RS-232 signal levels.|
|USB||Two USB 3.0 ports with speeds up to 5Gb/s.|
|Audio||Realtek HD Audio CODEC with line in / line out.|
|Video||Mini DisplayPort for high-resolution graphics.|
|JTAG||14-pin Xilinx JTAG header for programming and debugging FPGA AcroPack modules.|
|Form Factor||Mini-ITX form factor.|
|Size||19.3 x 19.3 x 8.3 cm 2.06 kg.|
|PCI Express||Complies with PCI Express Specification, Rev. 2.1.|
|PICMG||Complies with PICMG COM Express COM.0 Specification Rev. 3.0. Conforms to COM Express Carrier Design Guide Rev. 2.0.|
|Power Requirement||Accepts powered from a standard 24-pin ATX power supply or a 10-36V DC power supply. Carrier will auto-switch between power sources.|
+3.3 Volts (±5 %) 0.383A, typical.
+12 Volts (±8 %) 0.175A, typical.
|Fuses||Individually fused +1.5V, +3.3V, +5V, +12V, and -12V DC power.|
|Temperature Range||Operation: -40 to 71°C (200 lfm airflow min.) Storage: -55 to 125°C.|
|Relative Humidity||5 to 95% non-condensing.|
|Coating/Sealant||Conformal coating available on request.|
|Operating Systems||AcroPack series products require support drivers specific to your operating system. Supported operating systems include Linux®, Windows®, and VxWorks®.|
|Power on self tests (POST)||POST codes output to 2-digit LED for debugging|
To learn more about the ACX1100, click on the brochure tab above for specifications or contact us.