Profibus DP I/O Modules

Each 900PB Profibus DP I/O module provides a direct network interface for your I/O signals. Unlike “block I/O” devices that combine large, expensive processor blocks with snap-on I/O terminal blocks. The 900 PB modules handle the network interface and I/O processing in one, compact multi-channel module. A space saving yet cost effective product for systems, that need to add a small quantity of I/O channels at existing control sites or network to new remote sites.

To ensure high performance, modules feature an advanced microcontroller techology. On-board address switches and automatic baud rate detection (up to12 Mbps) simplify installation. Four-way isolation prevents ground loops and increases noise immunity. Indicator LEDs and self-diagnostics help to quickly catch problems.

Profibus PNO, CE, UL/cUL Class 1 Div 2 Approvals.

Listed are the different types of Profibus DP Analogue and Digital I/O Modules; see below for further model information or contact us.


Profibus DP Analog I/O	Profibus DP Digital I/O
Multi-channel units with flexible I/O ranges. These units provide an isolated network interface for voltage, current and temperature sensor signals or for non-networked controller signals. High-resolutions, low noise, A/D converters deliver high accuracy and reliability.	These modules provide an isolated Profibus-DP network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices

Profibus DP Accessories	Profibus DP Software Support
Select from an assortment of power supplies, adaptors, cables, and mounting kits to simplify installation of your Acromag Profibus DP Modules	Network devices, including Acromag’s 900PB I/O modules, are easily installed and configured using network management software typically provided by the supplier of the host or master controller.

Profibus DP Analogue I/O Modules

Analogue Input Modules

Analogue Output Modules

Multi-channel units with flexible I/O ranges. These units provide an isolated network interface for voltage, current and temperature sensor signals or for non-networked controller signals.

High-resolutions, low noise, A/D converters deliver high accuracy and reliability

Control up to 6 devices with a single unit. The units provide an isolated network interface for analogue output signals.

Outputs can be used to control mechanical equipment or write to display devices, data loggers and recorders, or to transmit data to non-networked PLCs and controllers.

Highlights

Universal I/O ranges support a variety of devices 12 – channel stand-alone module is very cost-effective
Differential inputs eliminate ground loops
-20 to 70°C operation
Auto baud rate detection
Industry-standard ASIC for network compatibility

Highlights

Universal I/O ranges support a variety of devices 6 – channel stand-alone module is very cost-effective
Selectable failsafe modes (0%, last-state, pre-defined) prevent unsafe conditions
Profibus-DP high-speed RS-485 communication (up to 12M bps)

BusWorks 900PB Series

961PB / 962PB

963PB / 964PB

965PB

6-Channel Differential Profibus -DP Input Modules

DC Current or DC Voltage Signals
6 input channels, 0 to 20mA in 3 selectable ranges (0 to 20 amps AC with optimal AC sensor) or ±78mV to ±10V DC with eight range options
12 to 36V DC power
Profibus-DP, RS-485 network up to 12Mbaud

961PB: 6 DC current input channels
962PB: 6 DC voltage input channels

12-Channel Single-Ended Input Profibus-DP Modules

DC Current or DC Voltage Signals
12 input channels, 0 to 20mA in 3 selectable ranges (0 to 20 amps AC with optinal AC sensor) or ±1V, ±5V or ±10V DC
12 to 36V DC power
Profibus-DP, RS-485 network up to 12Mbaud

963PB: 12 DC current input channels
964PB: 12 DC voltage input channels

4 or 6-Channel Input Profibus -DP Modules

Thermocouple or Millivolt Signals
4 or 6 input channels, thermocouple or DC millivolts (user-selectable)
12 to 36V DC power
Profibus-DP, RS-485 network up to 12Mbaud

966PB

972PB / 973PB

4 or 6-Channel Input Profibus-DP Modules

RTD or Resistance Signals
4 or 6 input channels, Platinum 100 ohm, Nickel 120 ohm, Copper 10 ohm; 0 to 500 ohms resistance
12 to 36V DC power
Profibus-DP, RS-485 network up to 12Mbaud.

4 or 6-Channel Output: DC Current or DC Voltage Signals

0 to 1mA, 0 to 20mA, or 4 to 20mA DC Current Output; 0 to 1V, 0 to 5V or 0 to 10V DC Output
12 to 36V DC Power
Profibus-DP, RS-485 network up to 12Mbaud

These modules provide up to six channels of analogue output. Multi-range outputs support a wide variety of industrial devices.

They can drive displays and recorders, control drives, or send analogue signals to other systems.

Profibus DP Digital I/O Modules

Models: 981PB / 982PB / 983PB

Profibus-DP 12-Channel Digital I/O

Active-Low Inputs, Sinking Outputs
12 input channels, 0 to 35V DC range
12 to 36V DC
High-speed RS-485

981PB: 12 input channels
982PB: 12 output channels
983PB: 12 input/output channels

These modules provide an isolated Profibus-DP network interface for twelve discrete input and/or output channels. The outputs provide direct on/off, high/low, or open/close control of industrial devices. The inputs sense the status of motors, pumps, valves and other equipment. The 983PB model with tandem I/O provides output level control and status verification in one unit.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Profibus DP I/O Modules