Universal High-Speed Thermocouple Input IOLITEir-8xTH-HS

Universal High-speed thermocouple input

Addressing the growing need for stable temperature measurements in EMC harsh environments.

The Dewesoft IOLITEir-8xTH-HS is an Universal High-speed Thermocouple Input.  Firstly, it is the new version of the 8-channel IOLITE thermocouple temperature module. It’s a channel-to-channel isolated DAQ device.  It is for thermocouple temperature measurements using universal thermocouple inputs: K, J, T, R, S, N, E, C, B.

Secondly, this device addresses the growing need for stable temperature measurements in EMC harsh environments.  Such as on the stator of an electric motor or near inverters.   As this  new module not only improves the EMC immunity of the previous unit on the digital side.  It also uses a sharp analogue antialiasing filter.  Like 3rd order, -3dB @ 1kHz and digital FIR filters to remove unwanted frequencies.

Thirdly, this input connector of the module is MINI TC for the universal thermocouple type. Providing sensor break detection in the software and applies physical LED indicators.

The module uses a new 24-bit ADC with sampling rates up to 10 kS/s per channel. Therefore, used in demanding applications to record transients of temperature shock.

Also a higher sampling rate enables Dewesoft filtering technology using digital FIR filters to reduce noise.  Floor down to -130 dB and reach a resolution of less than 1 μK.

The IOLITEir-8xTH-HS is equipped with two EtherCAT buses.  They work in parallel for both DAQ and real-time control. It can be mounted either in rack chassis (IOLITE-R12, IOLITE-R8, IOLITE-R8r, or IOLITE-LX-R8 chassis).

To find out more, contact us.