The Battery Box BB350A securely houses batteries that back up a ship’s main and other supplies. It’s a custom built steel enclosure with an IP23 rating and contains maintenance free lead acid cell batteries. This battery box is built sturdy can can withstand, ship motion due to sea action, weather, accelerations and velocities deriving from deliberate ship manoeuvres. As a result, it’s perfect for rugged environments and naval defence applications.
These transmitters isolate and convert sensor inputs to noise free, proportional DC current or voltage output signals. An optional relay output adds a local alarm function
These units receive DC current or voltage input signals, provide isolation and output proportional DC current or voltage signals. Both signal isolator models provide high voltage isolation between input, output and power (3-way).
On dual channel units, each channel operates independently with inputs isolated from each other to prevent interaction between channels.
This space saving two wire transmitter converts a 100 ohm Platinum RTD sensor input to a proportional 4-20mA signal.
The transmitter provides sensor excitation plus performs linearisation, lead wire compensation and lead break detection.
The NT2120 Modules offer 16 bi-directional discrete I/O channels for sourcing switch applications. The NTE Ethernet models provide a network interface to monitor or control discrete device levels.
Plus the NTX expansion models interface up to 64 discrete I/o channels on a single IP address.
The NT2110 Modules offer 16 bi-directional discrete I/O channels for sinking switch applications. The NTE Ethernet models provide a network interface to monitor or control discrete device levels.
Plus the NTX expansion models interface up to 64 discrete I/o channels on a single IP address.
The NT2240 modules offer 16 current inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. This type of model offers a compact network interface to monitor sensor levels or 0-10V Devices.
NTX Expansion models can interface up to 64 voltage inputs on a single IP address.
The NT2220 modules offer 16 current inputs. Each input supports bipolar and unipolar ranges with 16-bit A/D. This type of model offers a compact network interface to monitor sensor levels or 4-20mA loops.
NTX Expansion models can interface up to 64 current inputs on a single IP address.
The ATI Steering effort systems are used to measure steering wheel torque continuously by using a strap on steering wheel sensor that transmits real time torque measurements via radio telemetry.
ATi Telemetry Systems are typically used to transmit data from rotating shafts or machinery to a stationary telemetry receiver.
The 2040BC Miniature Strain Gage Transmitter can be connected to strain gages adhered to propellers or rotors to transmit blade strain or shaft torque in flight