VGA Amplifier Splitter MIL STD

This series of Rugged VGA & SVID Video Amplifier Splitter have a single ended or differential signal input/output, with unity gain and an output signal amplitude for single ended outputs 0.5V to 3.0V peak-to-peak; and a 10V peak-to-peak Input Overload.

This proven video amplifier, splitter product is widely used in the Aerospace and Defence Industry.

The EON Instrumentation Component Series Models are a MIL STD VGA Amplifier Splitter.  Firstly, this video amplifier has a flat frequency response from 30Hz to 30MHz.  This means that a purer signal without enhancements from input to output is provided.

Secondly, listed below is a table on the Component Series Video Amplifier Splitter Models.  The outline and dimension drawings are attached.  They represent the models with different input and output impedances.  Which can be integral with ground chassis and different fixed gains from video in.  They system operates with nominal 28 VDC input power.  All independent outputs are unity gain from video in.

Thirdly, EON can provide additional configuration if required. Video connectors can be a combination of BNC or TNC, single ended or differential, top or side mounted and uncapped or capped with tethers.

Finally, for more information, contact us.

 

VGA Amplifier Splitter MIL STD

Model # Standard Signal In/Out Standard Signal Connector In/Out # Inputs # Outputs Features
ADV-301-VGA VGA & NTSC MilS 1 2 Fac Adj Gains; SWAP, 3Pin Power
ADV-301-VGA-2 VGA MilS 1 2 Fac Adj Gains; SWAP, 3Pin Power
ADV-301-VGA-2-1 VGA MilS 1 2 Fac Adj Gains; SWAP, 3Pin Power larger mount
ADV-SVID-12 SIU MilS 1 2 Fac Adj Gains; SWAP, 3Pin Power

Reviews

There are no reviews yet.

Be the first to review “VGA Amplifier Splitter MIL STD”

Your email address will not be published.

4_Data-Sheet_VGA-SVID_10-12-18