The Rula-Tech RL-R19 is a Portable Spectrum Analyser. Perfect for examining the vibration condition of machines, bearings and gear defects. Firstly, it captures data from vibration sensors, examines and identifies defects and balances rotors of machines and mechanisms.
Secondly, by building up the software of RL-R19 devices enables forming a set of functional options intended to solve specific problems. The only required option is Basic Software. Other options may be combined any configuration.
The following options for the Portable Spectrum Analyser are available:
- Basic Software (allows the making and viewing recordings)
- Part Octave Analysis
- Static Analysis
- Balancing
- Signal Generator
- Repeater
- Automatic Measurements
- Filtration
- Shock Analysis
- Sychronisation
Specifications
| Number of measuring channels | 4-8 |
| Tacho-Channel | 1 |
| Range of Measure Signals | ±20 V |
| Mode of measuring channels | IEPE, Linear, Single-ended |
| Logical inputs and outputs | 4 inputs and 4 outputs |
| Screen resolution | 640 x 480 pixels |
| Screen diagonal | 5.7 inches |
| Battery capacity | ≥ 8000 mAh |
| Protection | IP65 |
Input
| Sensor type | IEPE, linear |
| FRF non-linearity (1kHz) in the | ≤ 2dB |
| Range | 1 to 40,000 Hz |
| FRF non linearity (1kHz) in the | ≤ 5dB |
| Range | 1 to 60,000 Hz |
Other
| Frequency Range | DC, 0.1 to 60,000 Hz |
| DAC/ADC Resolution | 24 bits |
| Temperature Range | -30 to 60°C |
| Dimensions | 260 x 152 x 55 mm |
| Weight | 2.3 Kg |
| Power supply | Autonomous (>8 hours) 230V AC 12-36V DC V |
Finally for more information on the RL-R19 Portable Spectrum Analyser, contact us.
