The Rula-Tech RL-S039 is a Strain Gauge Amplifier for Electrodynamic Shakers. However, it can also be used to connect strain gauge sensor to any data acquisition and vibration control system.
Firstly, every channel on the RL-S039 has a noise filter. The amplifier provides a programmable bridge offset nulling and shunt calibration.
Secondly, the unit is automated. It automatically decreases current to prevent short circuiting or excitation overload.
Finally, it is simple to connect. Connect the amplifier to your network using USB or Ethernet. Then configure and control RL-S039 via VisProbe SL Software.
Specification of the Strain Gauge Amplifier for Shakers RL-S039
Channels
| Number of channels | 4 |
| Gain (configurable) | 10, 100, 1000 |
| Excitation voltage (configurable) | 2.5; 5; 10 V |
| Frequency Range | DC to 20,000 Hz |
| Maximum excitation current | 50mA |
Other
| Dimensions | 50 x 150 x 230 mm |
| Temperature range | 5 to 40°C |
| Weight | 0.7 Kg |
| Power consumption | 10 VA |
Finally for more information, contact us.
