Key Features & Benefits of the QLA Series Custom Load Cells
Wide Range of Geometries & Capacities
This range of QLA series custom load cells offers S-beam, pancake / low profile, thru-hole (donut), column, inline, and also multi-axis formats, covering capacities from grams to hundreds of thousands of pounds.High Accuracy & Low Nonlinearity
These sensors are built with tight tolerances. Some models also offer nonlinearity and non-repeatability as low as ±0.02% of rated output.Robust Construction & Materials
Bodies and flexures use aerospace-grade 17-4 stainless steel or anodized aluminum for strength, corrosion resistance, and repeatable performance.Temperature Compensation & Stability
Internally compensated designs reduce drift over temperature. They also give stable readings over a broad operating range.Overload Protection / Mechanical Stops
Many models include built in overload stops or high safe overload margins, protecting the sensor from mechanical abuse during installation or inadvertent force spikes as a result.Flexible Electrical Interfaces
Output in mV/V, VDC, 4–20 mA, or digital signals, and also as signal conditioning via FUTEK’s amplifiers and USB modules.Custom & OEM Solutions
For special applications, these sensors also offer custom design options to modify geometry, capacity, signal type, mounting, and environmental packaging.Calibration & Traceability
Each sensor can come with factory calibration. FUTEK also provides ISO-traceable calibration services to ensure measurement confidence.
Typical Applications of the QLA Series Custom Load Cells
A | B |
---|---|
Sensor | Applications |
QLA215 | Used for tension and compression measurement in compact assemblies, automation equipment, material testing, robotics, process control systems, and calibration fixtures. |
QLA335 | Ideal for load monitoring for presses, structural test rigs, automation systems, and any environment requiring tension/compression sensing with overload protection and dual-bridge reliability. |
QLA299 | Ideal for aerospace, MRI-compatible instrumentation, and applications where isolating magnetic influence on force measurements is critical. |
QLA341 | Ideal for inline force measurement where a bolt, shaft or structural member must pass through the sensor. |
QLA383 | Ideal for field testing, instrument labs, and calibration services needing a compact, accurate fixture for force sensors. |
QLA388 | Used in preload, clamping, actuator, and compression measurement systems |
QLA391 | Suited for compact spindle, bolt, and shaft-load monitoring, delivering amplified signal output for inline tension/compression measurement in machine tools, actuator systems, and automated test setups. |
QLA393 | Ideal for measuring pure compression or force in systems where resistance to bending moments and shear is critical—such as precision weighing modules, load plates, and flat surface force sensing in compact assemblies. |
QLA392 | Ideal for measuring compressive forces in spindle shafts, bolts, and structural loading paths, the QLA392 integrates amplification and mounting flexibility—making it a go-to sensor for machine tools, structural test rigs, and industrial instrumentation. |
QLA405 | Ideal for compact systems and precision instrumentation, allowing accurate bi-directional force measurement in medical devices, robotics, micro-weighing setups, and OEM assemblies where space is constrained. |
QLA414 | Ideal for precision force measurement in surgical robotics, micro-assembly, haptics, wearable devices, and other applications requiring ultra-compact, high-accuracy load sensing. |
QLA417 | Used in applications like valve actuation force measurement, instrumented mounts, micro-robotics, small machinery, and OEM subsystems requiring flange-mounted force feedback. |
QLA420 | Ideal for measuring compressive loads in compact spaces, making it suitable for lever systems, structural testing fixtures, small-scale actuators, and design verification applications. |
QLA418 | Used in applications requiring through-hole (washer) force sensing—such as bolt preload monitoring, clamp force measurement, structural instrumentation where a rod or bolt passes through the sensor, and in systems needing custom-fit force washers integrated into assemblies |
QLA429 | Used for inline force measurement in compact mechanical systems, making it suitable for actuators, robotics, small‐scale machinery, and embedded instrumentation. |
QLA428 | Ideal for clamping systems, structural monitoring, press fixtures, and instrumentation in mechanical assemblies. |
QLA105 | Ideal for measuring clamp force, bolt preload, structural load, and press or fixture applications where a shaft or fastener must pass through the sensor. |
QLA106 | Ideal for clamping, structural testing, press frames, and instrumentation in mechanical assemblies. |
QLA115 | Used in bolt preload, compression, structural mounting, and instrumentation systems where a force path must pass through the sensor. Eables inline force measurement in mechanical assemblies. |
QLA116 | Ideal for clamp force sensing, bolt preload monitoring, structural instrumentation, and applications where 4-40 mounting holes integrate the sensor flush into mechanical systems. |
QLA127 | Ideal for press monitoring, assembly equipment, test stands, and applications requiring a low-profile, high-accuracy load button sensor. |
QLA128 | Used in test fixtures, packaging presses, actuator tip force monitoring, and small device validation where threaded or mounting-hole button integration is needed. |
QLA129 | Suits applications such as component testing, actuator force feedback, indexer sensing, and compact test rigs requiring threaded or mounting-hole button integration. |
QLA133 | Ideal for weighing platforms, force plates, structural testing, and compact machinery requiring an integrated signal output. |
QLA132 | Ideal for monitoring and controlling tension in cables, wires, tapes, and filaments used in winding, extrusion, spooling, and precision web handling systems. |
QLA167 | Ideal for medical devices, micro-scale weighing, laboratory instrumentation, and precision sensor systems requiring gram-level resolution. |
QLA199 | Ideal for testing setups, material testing machines, actuator feedback systems, and OEM devices needing bidirectional force sensing. |
QLA209 | Ideal for clamping systems, structural instrumentation, press fixtures, and mechanical assemblies where a rod or fastener must pass through the sensor. |
QLA210 | Ideal for clamping systems, actuator assemblies, structural tests, and preload sensing in mechanical designs.” |
QLA214 | Ideal for instrumentation in test rigs, actuator tips, press tooling, and OEM assemblies where threaded or mounting-hole integration is needed. |
QLA247 | Well suited to clamp monitoring, structural weld inspection, in-line load sensing in weld fixtures, and applications where the sensor must form part of the welded joint. |
QLA233 | Ideal for preload monitoring, structural testing, clamp systems, and instrumentation in mechanical assemblies. |
QLA125 | Used for precise tension and compression sensing in compact linkages or lever arms. Ideal for robotics, actuator feedback, test rigs, and embedded measurement in constrained mechanical systems. |
QLA237 | Used where a central rod, bolt or shaft must pass through the sensor. Ideal for inline compression, clamping force monitoring, structural instrumentation, and load measurement in mechanical assemblies. |
QLA238 | Used for inline force measurement where a shaft or fastener must pass through the sensor. Ideal for clamp preload monitoring, structural assemblies, press fixtures, and integrated instrumentation in mechanical systems. |
QLA239 | Ideal for clamp force monitoring, structural instrumentation, integrated machinery, and mechanical assemblies. |
QLA249 | Ideal for preload monitoring, structural testing, clamp systems, and integrated force sensing in mechanical designs. |
QLA253 | Ideal for bolt preload monitoring, structural testing, clamp systems, and inline compression or tension measurement in industrial setups. |
QLA254 | Ideal for clamping systems, structural instrumentation, preload monitoring, and integrated sensing in mechanical assemblies. |
QLA255 | Ideal for compression / tension sensing in clamp systems, structural fixtures, test rigs, and integrated mechanical assemblies |
QLA261 | Ideal for torque transducers, clamp systems, press machines, structural testing, and instrumented shafts. |
QLA267 | Ideal for test rigs, structural load monitoring, actuator systems, and instrumentation where tailored force measurement is required. |
QLA277 | Ideal for inline compression or preload measurement, clamping systems, structural monitoring, and integration within mechanical assemblies. |
QLA285 | Ideal for robotics, actuator feedback, test rigs, and mechanical assemblies with constrained space and motion paths. |
QLA284 | Ideal for simultaneous bidirectional sensing, redundant feedback in robotics or test systems, and applications requiring dual output for safety or precision instrumentation. |
QLA293 | Ideal for clamp systems, structural monitoring, preload control, and integrated sensor assemblies in mechanical systems. |
QLA292 | Ideal for clamp monitoring, structural testing, preload sensing, and integrated load measurement in mechanical assemblies |
QLA305 | Ideal for clamping systems, bolt preload monitoring, structural instrumentation, and integrated load measurement in mechanical assemblies. |
QLA307 | Ideal for clamp force sensing, structural instrumentation, preload monitoring, and integration into thin mechanical joints. |
QLA308 | Ideal for clamp force monitoring, structural testing, preload measurement, and integration into mechanical assemblies where space and geometry demand a washer-style sensor. |
QLA321 | Ideal for automation, robotics, test rigs, actuator feedback, and mechanical assemblies needing built-in overload protection. |
QLA324 | Ideal for applications such as bearing load sensing, flanged structural measurement, torque ring instrumentation, and integrated force monitoring in mechanical assemblies. |
QLA329 | Ideal for robotics, feedback loops, material testing, and embedded instrumentation. |
QLA328 | Ideal for structural testing, beam deflection monitoring, force measurement in flexure components, and embedded systems where bending moments are critical. |
QLA336 | Ideal for force sensing in small actuators, precision test instruments, medical devices, and OEM systems with limited space. |
QLA340 | Ideal for robotic grippers, collet mechanisms, pick-and-place equipment, and automated tool force feedback applications. |
QLA339 | Ideal for measuring compressive and tensile loads in gear struts, shock absorbers, and structural drop tests for aircraft landing systems. |
QLA343 | Ideal for clamp force monitoring, structural instrumentation, preload sensing, and integration into mechanical assemblies where space or geometry constraints exist. |
QLA348 | Ideal for robotics, actuator feedback, test rigs, and embedded instrumentation where a compact, precise beam sensor is required. |
QLA350 | Ideal for automation, robotics, load feedback loops, test rigs, and mechanical assemblies needing built-in overload resilience. |
QLA352 | Ideal for preload sensing, clamp force monitoring, structural instrumentation, and integration in mechanical assemblies. |
QLA357 | Ideal for robotics, actuator feedback, OEM instrumentation, and precision test fixtures. |
QLA355 | Ideal for material testing rigs, actuator feedback, OEM force sensing, and embedded instrumentation where bidirectional measurement is needed. |
QLA370 | Ideal for clamping systems, bolt preload sensing, structural instrumentation, and mechanical assemblies requiring inline compression with a passing shaft. |
QLA359 | Ideal for robotics, bearing load monitoring, reaction force sensing, and structural side-load instrumentation. |
QLA206 | Ideal for clamping systems, preload measurement, structural instrumentation, and integrated force sensing in mechanical assemblies. |
QLA362 | Ideal for robotics, actuator feedback, test rigs, and assemblies requiring built-in overload protection. |
QLA371 | Ideal for clamp force sensing, preload measurement, structural instrumentation, and integrating load measurement around a bolt or rod. |
QLA373 | Ideal for cyclical test rigs, endurance testing, servo control systems, and long-term mechanical actuation monitoring. |
QLA374 | Ideal for force plates, compact test rigs, structural load sensing, and instrumentation under confined mechanical assemblies. |
QLA385 | Ideal for micro-scale testing, actuator tips, sensor heads, and embedded systems requiring threaded mounting in tight spaces. |
QLA387 | Ideal for medical devices, small actuators, test probes, and embedded instrumentation where threaded, compact load measurement is required. |
QLA389 | Ideal for actuator measurement, clamping force control, robotics, and instrumentation with smart plug-and-play calibration. |
QLA394 | Ideal for precision force measurement in flat surfaces, test rigs, load plates, and instrumentation where purity of load is essential. |
QLA396 | Ideal for fixture integration, structural testing, load monitoring in machine tools, and instrumentation in constrained mechanical systems. |
QLA397 | Ideal for underwater instrumentation, fluid flow measurement, sensor heads in wet environments, or any application needing waterproof force measurement. |
QLA404 | Ideal for clamping systems, structural instrumentation, and mechanical designs needing integrated load sensing with mounting flanges. |
QLA407 | Ideal for structural test rigs, machine tool monitoring, fixture integration, and precision instrumentation in constrained geometries. |
QLA408 | Ideal for clamp systems, preload sensing, structural instrumentation, and integrated mechanical assemblies. |
QLA409 | Ideal for actuator systems, test rigs, robotics, and OEM assemblies requiring compact, inline tension and compression sensing. |
QLA410 | Ideal for clamp systems, structural instrumentation, preload measurement, and compact mechanical assemblies requiring flange integration. |
QLA416 | Ideal for medical devices, sealed actuators, microfluidic instrumentation, and OEM assemblies requiring integrated load sensing under protected conditions. |
QLA422 | Ideal for integration into OEM systems, instrumentation modules, test rigs, and embedded devices where solid performance in a small form factor is required. |
QLA424 | Ideal for tactile feedback, microassembly, robotics, biomedical instruments, and other systems demanding high-resolution compression measurement in tight spaces. |
QLA431 | Ideal in clamp force monitoring, bolt preload measurement, structural instrumentation, and mechanical systems requiring inline compression around a shaft. |
QLA439 | Ideal for robotics, OEM instrumentation, test fixtures, and embedded systems needing high-precision force sensing in a small footprint. |
QLA444 | Ideal for embedded instrumentation, actuator feedback, small force test rigs, and OEM systems requiring high-accuracy measurements in tight geometries. |
QLA427 | Ideal for robotics, actuator feedback, test rigs, and compact OEM instrumentation systems. |
QLA146 | Ideal for test rigs, structural monitoring, actuator interfaces, and OEM instrumentation in machinery. |
QLA186 | Ideal for compact installations requiring robust, low-deflection tension/compression feedback. |
QLA200 | Ideal for MRI instrumentation, scientific equipment, non-ferrous structural testing, and precision sensing in aerospace or laboratory settings. |
QLA286 | Ideal for actuator feedback, material testing rigs, robotics, and OEM systems requiring compact, dual-mode load measurement. |
QLA337 | Ideal for robotics, load feedback redundancy, precision test rigs, and instrumentation systems requiring parallel outputs or dual sensing paths. |
LLB400 | Ideal for inline compressive force measurement in press systems, structural fixtures, and mechanical assemblies requiring a low-profile load button with mounting threads and robust environmental resistance. |
QLA376 | Ideal for sensor redundancy, bidirectional sensing, robotics, test rigs, and applications requiring parallel output paths. |
QLA378 | Ideal for test rigs, actuator feedback, structural monitoring, and embedded instrumentation requiring a low-profile beam sensor |
QLA401 | Ideal for surgical instrument calibration, autoclave-compatible fixtures, and fluidic systems where a sterile bore must pass through the sensor. |
QLA402 | Ideal for medical devices, surgical instrument calibration, and washdown instrumentation requiring autoclavable load sensing. |
QLA415 | Ideal for actuator feedback, embedded instrumentation, testing rigs, and OEM systems requiring a small, threaded force sensor. |
LCM100 | Ideal for compact tension or compression sensing. Used in inline test rigs, miniature actuators, embedded force feedback systems, and OEM instrumentation where space is tight but accurate load measurement is essential. |
Ordering & Configuration Tips
If you would like to learn more about these products, please contact us.
Reviews
There are no reviews yet.