ARINC-429/717 PMC Interface PMC-A429

The ARINC PMC-A429 is a PMC form factor interface card that is ideal for VPX, VME, cPCI, cPCIe or PXI Single Board Computers or Carrier Cards.  Channel Configurations with Software include ARINC 419/429/575/573/717.

Allowing selectable Rx/Tx channels, baud rates, bit encoding and word configurations such as Start/Sync/Stop; Parity; bits/word; and MSB/LSB).  As well as the ability to encode or decode almost any ARINC-429 physical layer signal.

The Alta Data PMC-A429 is an ARINC-429/717 PMC Interface Card for Defence, Aerospace and Avionics applications.  Firstly, this product comes with the feature rich AltaAPI which is the support software. It is a multi-layer ANSIC and Windows. NET 2.0 architecture.  This hardware and software combination increases system performance, offers flexibility whilst reducing integration time.

Secondly, the PMC-A429 is based on AltaCore™.  An advanced 32-bit FPGA Protocol Engine technology giving you the ability to encode and decode almost any ARINC-429 physical level signal.

The Transmit Tx capability in the product includes simple and complete frequency controls for each channel.  Also including playback and signal generator operations.  Whereas, Dual Receive (RX) functions include simultaneous channel level buffering and multi channel level buffering.


Features of ARINC-429/717 PMC Interface PMC-A429 include:

  • 4-30 ARINC-429 Channels with up to 16 shared RX/TX & 14 RX Channels
  • Commercial/Extended Temp/Rugged/Conduction Cooled
  • **Signal capture on two RX Channels standard
  • Up to 4 ARINC 717 RX and TX Channels
  • 1 Mb, 32 RAM per 16 Channel Bank
  • Avionics and RS-485 Discretes
  • Simultaneous Channel level and Multi Channel RX
  • Full TX Frequency Control and Buffering per Channel
  • Programmable Bit Rate (512-200K), Bit Encoding, Bits
  • Per Word, Start/Stop, and Parity
  • Encode/Decode almost any ARINC-429 PHY Signal
  • Start up, Loop Back, User and periodic BIT
  • Dual Temperature Sensors
  • Digital Signal Generator – Fully Test Bit Encoding
  • Advanced AltaAPI and AltaView Analyser GUI
  • Contact us for latest VxWorks/RTOS
  • 3.3 or 5 Volt PCI Signalling – PCI-X Compatible
  • NOTE: On shared channels: TX lines have an extra RX load; when powered off, RX Channels can have severe voltage drain.  Use only dedicated RX channels for critical systems.


Alta Data is committed to provide each customer with a risk free integration and will assist with Metromatics to provide help with any level of your system development project.

For more information, contact us.


There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.