Telemetry Receiver & Combiner Range
Lumistar telemetry receivers and diversity combiners provide configurable RF reception, signal combining, demodulation, bit synchronisation and telemetry processing for modern ground-station applications.
The current range includes modular, rackmount and portable systems with single, dual or quad-channel configurations. Depending on the selected model and licensed options. These systems can support traditional clock and data outputs, telemetry recording, signal analysis and network-based telemetry data streaming.
Metromatics supplies and supports Lumistar telemetry products throughout Australia and New Zealand. Furthermore, our team can help you select the appropriate receiver format. Such as RF bands, number of channels, demodulation package, recording functions and output interfaces.
Compare Lumistar Telemetry Receivers and Combiners
| Model | Format | Receiver configuration | Best suited to |
|---|---|---|---|
| LS-28-DRSM-R2D | 2U rackmount with touchscreen | Dual RF receiver channels with diversity combining | Fixed ground stations requiring convenient front-panel control and status monitoring |
| LS-28-SRSM | Compact modular unit | One RF receiver channel plus a separate 70 MHz IF input channel | Compact systems requiring single-channel RF reception and additional IF processing |
| LS-28-DRSM | Compact modular unit | Dual RF receiver channels with diversity combining | Embedded, mobile, antenna-pedestal and remote telemetry installations |
| LS-28-DRSM-R1 | 1U rackmount | Dual RF receiver channels with diversity combining | Fixed ground stations where rack space is limited |
| LS-28-DRSM-P1 | Portable IP67-rated case | Dual RF receiver channels with diversity combining | Mobile, field-deployable, airborne, shipboard and remote operations |
| LS-28-EC-DRS | Portable economy chassis | Dual-channel receiver and combiner | Cost-conscious portable ground-station applications requiring two receiver channels |
| LS-28-EC-QRS | Portable economy chassis | Quad-channel receiver and combiner | Portable applications requiring up to four receiver channels |
The most suitable model will depend on the number of channels, required RF bands, telemetry formats, data rates, diversity requirements, installation environment and output interfaces.
LS-28-DRSM-R2D Dual-Channel Rackmount Receiver with Touchscreen
The Lumistar LS-28-DRSM-R2D combines dual-channel telemetry reception, diversity combining and telemetry processing in a 2U rackmount enclosure.
Most importantly, its integrated front-panel touchscreen gives operators direct access to basic receiver controls and system status. As a result, operators can review key information at the equipment rack without connecting a separate display.
The two RF receiver channels can operate independently or combine incoming signals to improve reception during signal fading and multipath conditions. In addition, the system can support data recording, Telemetry over IP, telemetry processing and display capabilities.
Key capabilities
- Integrated front-panel touchscreen
- Two independent RF receiver channels
- Digital Pre-D diversity combining
- Up to five selected RF bands
- Customer-defined RF bands within the supported 200 MHz to 6 GHz range
- Multi-mode telemetry demodulation
- Bit synchronisation, frame synchronisation and decommutation options
- TTL and high-speed RS-422 clock and data outputs
- Optional time-stamped UDP telemetry streaming
- Optional solid-state telemetry recording
- IRIG time and IEEE 1588 PTP support
- Spectrum, eye-pattern and constellation displays
- Ethernet, USB and serial control interfaces
- Integrated 70 MHz signal modulator
- Worldwide 110–240 VAC power input
Learn more about the Lumistar LS-28-DRSM-R2D Dual-Channel Telemetry Receiver with Touchscreen.
LS-28-SRSM Modular Single-Channel Telemetry Receiver
The LS-28-SRSM provides single-channel RF telemetry reception, optional data recording and telemetry processing in a compact modular enclosure.
The system includes one configurable RF receiver channel and a second channel that accepts a 70 MHz IF input. Therefore, it can process an RF telemetry signal while also accepting an external IF or baseband source.
Depending on the selected configuration, the LS-28-SRSM can support multi-mode demodulation, two-channel bit synchronisation, time-stamped UDP data streaming and telemetry data recording.
Key capabilities
- One configurable multiband RF receiver channel
- Separate 70 MHz IF input channel
- Compact modular construction
- Independent RF and IF data demodulation
- Dual-channel PCM bit synchronisation
- Multi-mode telemetry demodulation options
- Simultaneous TTL and high-speed RS-422 clock and data outputs
- Optional UDP telemetry data streaming
- Optional solid-state data recording
- Spectrum, eye-pattern and constellation displays
- Ethernet, USB and RS-232 control
- Wide-range 9–42 VDC power input
The LS-28-SRSM suits compact ground, mobile and airborne systems that require one RF receiver together with additional IF processing.
LS-28-DRSM Modular Dual-Channel Receiver and Combiner
The LS-28-DRSM integrates two RF telemetry receiver channels, diversity combining, optional data recording and telemetry processing into a compact modular unit.
Because the enclosure is approximately the size of a hard drive, engineers can integrate the system into antenna pedestals, mobile equipment, airborne platforms, shipboard installations and remote telemetry sites.
The receiver channels can operate independently or combine two incoming signals. Consequently, the system can help improve reception where fading, multipath or changing antenna polarisation may affect telemetry signal quality.
Key capabilities
- Two independent RF receiver channels
- Digital Pre-D diversity combining
- Compact modular format
- Up to five selected RF bands
- Customer-defined bands within the supported 200 MHz to 6 GHz range
- Multi-mode telemetry demodulation
- Three clock and data outputs for Channel 1, Channel 2 and combined data
- Three corresponding 70 MHz IF outputs
- Optional frame synchronisation and decommutation
- Optional UDP telemetry data streaming
- Optional data recording
- Receiver parameter logging
- Ethernet, USB and serial control
- Wide-range DC power input
The LS-28-DRSM offers a flexible choice for applications. Especially those that need dual-channel reception without a full rackmount or portable enclosure.
LS-28-DRSM-R1 1U Rackmount Receiver and Combiner
The LS-28-DRSM-R1 packages Lumistar’s dual-channel receiver, diversity combiner and telemetry processor within a compact 1U rackmount enclosure.
Firstly, it suits permanent telemetry ground stations where rack space is limited. Moreover, engineers can configure the system with selected RF bands, demodulation formats, data recording, telemetry processing and Ethernet streaming capabilities.
The two channels can operate independently or provide diversity combining. The system also offers local connectivity and comprehensive remote control through Ethernet, USB or serial interfaces.
Key capabilities
- Space-saving 1U rackmount enclosure
- Two independent RF receiver channels
- Digital diversity combining
- Configurable multiband RF reception
- Multi-mode telemetry demodulation
- Optional telemetry recording
- Optional time-stamped UDP data streaming
- Clock, data and 70 MHz IF outputs
- Spectrum, eye-pattern and constellation displays
- Ethernet, USB and serial control
- Standard AC power input
Choose the LS-28-DRSM-R1 when rack space takes priority over front-panel touchscreen operation.
LS-28-DRSM-P1 Portable Receiver and Combiner
The LS-28-DRSM-P1 places Lumistar’s dual-channel receiver, diversity-combining and telemetry-processing technology inside a rugged portable case.
Its IP67-rated enclosure supports AC power. Or an optional rechargeable battery system with hot-swapping capability. Consequently, teams can use the receiver at temporary ground stations, flight lines and remote telemetry sites where permanent rack equipment may not be practical.
The portable platform can accept two RF telemetry signals and provide independent or diversity-combined operation. It can also support telemetry recording, signal simulation, IRIG timing and Telemetry over IP multicast.
Typical applications
- Mobile telemetry receiving stations
- Flight-line testing
- Temporary ground stations
- Remote telemetry sites
- Airborne and shipboard operations
- Antenna testing
- Ground-station backup
- Field-based research and development
The LS-28-DRSM-P1 provides a portable telemetry receiving system without sacrificing the main processing capabilities of the modular DRSM platform.
LS-28-EC-DRS Portable Dual Receiver and Combiner
The LS-28-EC-DRS is a portable economy-chassis telemetry system with two receiver channels and diversity-combining capability.
Firstly, the system supports independent two-channel reception or signal combining across selected RF bands. It then converts the RF inputs to 70 MHz IF for digital processing, demodulation and bit synchronisation.
Available demodulation formats include PCM/FM, SOQPSK, BPSK, QPSK, OQPSK, AQPSK and PCM/PM. In addition, the system can provide TTL and RS-422 clock and data outputs with PCM code conversion.
Key capabilities
- Portable economy-chassis format
- Two independent receiver channels
- Pre-D diversity combining
- Up to four selected RF bands
- Multi-mode demodulation
- TTL and RS-422 clock and data outputs
- Optional post-D combining
- Spectrum and constellation displays
- Built-in bit-error reader
- Integrated 70 MHz modulator
- Software and firmware upgrade capability
The LS-28-EC-DRS provides a practical option for portable ground stations that require dual-channel reception within a self-contained computer-based system.
LS-28-EC-QRS Portable Quad-Channel Receiver and Combiner
The LS-28-EC-QRS expands the portable economy-chassis platform to four RF receiver channels.
In addition, Operators can use the channels independently or configure them for signal combining. Therefore, the system suits applications that need to receive or compare multiple telemetry signals within a portable ground-station system.
The LS-28-EC-QRS supports selected multiband receiver configurations, 70 MHz IF processing, multi-mode demodulation and bit-synchronised clock and data outputs.
Key capabilities
- Portable economy-chassis format
- Four RF receiver channels
- Independent reception or signal combining
- Up to four selected RF bands
- Multi-mode telemetry demodulation
- TTL and RS-422 clock and data outputs
- Optional post-D combining
- Spectrum and constellation displays
- Built-in bit-error reader
- Integrated 70 MHz modulator
- Software and firmware upgrade capability
Choose the LS-28-EC-QRS when the application requires more receiver channels than a dual-channel portable system can provide.
Configurable Telemetry Receiver Capabilities
Lumistar configures many receiver functions according to the application. However, depending on the selected model and licensed options, available capabilities can include:
- Independent multichannel RF reception
- Digital Pre-D diversity combining
- Best-channel selection
- Polarisation, frequency or spatial diversity
- Selected P, L, S, NATO E and C-band reception
- Customer-defined RF bands
- 70 MHz IF inputs and outputs
- Digital and analogue PCM/FM
- SOQPSK and Multi-H CPM
- BPSK, QPSK, OQPSK and related formats
- Bit synchronisation
- Frame synchronisation and decommutation
- PCM code conversion
- Forward error correction
- Telemetry data recording
- Receiver parameter logging
- Time-stamped UDP telemetry streaming
- IRIG-based data formats
- IRIG and PTP timing
- Spectrum, eye-pattern and constellation displays
- Bit-error-rate testing
- Signal simulation and receiver loopback testing
- Ethernet-based control and monitoring
However, not every model includes every function as standard. Therefore, customers should confirm the required features and licensing when requesting a quotation.
Typical Applications
Lumistar telemetry receivers and diversity combiners suit:
- Flight-test telemetry
- Aeronautical telemetry ground stations
- Missile and weapons testing
- Defence test ranges
- UAV and autonomous-platform testing
- Antenna tracking systems
- Mobile telemetry receiving stations
- Temporary or remote telemetry sites
- Airborne and shipboard telemetry installations
- Research and development laboratories
- Telemetry link testing and validation
How to Select a Telemetry Receiver
Selecting a telemetry receiver requires more than choosing between a modular, portable or rackmount enclosure.
Before requesting a quotation, consider:
- Required RF bands and tuning ranges
- Number of RF receiver channels
- Any external 70 MHz IF inputs
- Independent reception or diversity combining
- Modulation and demodulation formats
- Maximum telemetry data rate
- Bit and frame-synchronisation requirements
- Error-correction requirements
- Clock, data and IF outputs
- Telemetry over IP requirements
- Data-recording capacity
- IRIG or PTP timing requirements
- Rackmount, modular or portable installation
- Local or remote control requirements
- AC, DC or battery power
- Environmental and portability requirements
Providing this information early will help Metromatics identify the appropriate platform and prepare an accurate configuration.
Discuss Your Telemetry Receiving Requirements
Finally, Lumistar telemetry receivers and combiners offer extensive RF-band, channel, demodulation, timing, recording and data-output options.
Therefore, Metromatics can review your technical requirements and help you compare the available modular, rackmount and portable systems.
Contact Metromatics for technical assistance, product availability or a quotation for a Lumistar telemetry receiver and diversity combiner.
