The XMC730 is a XMC ADC and DAC Converter that also handles digital I/O and timer/counter functions.
XMC Mezzanine Modules
Features & Benefits
Analogue Inputs
- 16 differential (±10.24V, ±10.0V, ±5.12V, ±5.0V, 0 to 10.24V, 0 to 10.0V, 0 to 5.12V ranges)
- 16-bit ADC with integral sample-and-hold and reference
- 1.264μS conversion time (791KHz rate)
- 1026 sample FIFO buffer
- Programmable FIFO threshold conditions for interrupts, DMA transfers, and flags
- User-programmable channel conversion sequence and timing
- External trigger input or output
- Acromag Factory calibration constants stored in on-board flash memory for error correction
Analogue Outputs
- Eight analogue output channels (±3V, ±5V, ±10V, -2.5 to +7.5V, 0-5V, and 0-10V ranges)
- Individual 16-bit DACs per channel with 7.5μS settling time
- Flexible operating mode, trigger, and memory allocation
- Configurable for direct access, single burst, continuous, or streaming (FIFO) output
- Reliable software calibration with coefficients stored on-board
- FIFO for waveform generation
- Interrupt on user-programmable FIFO threshold
- Shared 64K x 16-bit sample memory
Digital I/O
- 16 bidirectional input/output channels (direction configured in 8-channel groups)
- TTL-compatible thresholds
- Programmable change-of-state/level interrupts
- Failsafe power-up and system reset
Counter/Timers
• Multi-function 32-bit counter/timer
– Quadrature Position measurement
– Pulse Width modulation
– Watchdog timer
– Event counter
– Frequency measurement
– Pulse-width or period measurement
- One-shot and repetitive one-shot pulse waveform generation
- Programmable interface polarity
- Internal or external triggering
- CMOS compatible thresholds
General
• DMA transfer support to move data between module memory and PCIe bus
• Software development tools for VxWorks®, Linux®, and Windows® environments
Click on the Product Brochure Tab above for the specification sheet on XMC ADC DAC Converter or for more information, contact us.
Reviews
There are no reviews yet.