RTD Temperature Transmitters

With the assistance of our partner, Metromatics is able to offer a range of RTD Temperature Transmitters. They are available in single or dual channel versions, two, three or four wired models, loop powered, high voltage isolated, voltage or 4-20ma outputs and some models are USB configured.

They accept a range of inputs from standard 100 ohm Pt RTD up to 900 ohm, ohm Ni, ohm Cu, linear resistance and other universal inputs.

Elevate your monitoring systems with our range of RTD Temperature Transmitters. Firstly, engineered to seamlessly convert input signals from Platinum, Copper, or Nickel RTD sensors into universally recognised 4-20mA or 0-10V DC outputs. These transmitters are not just devices. They are the nerve centre of your temperature sensing equipment. Because they adeptly transmit critical data to your controllers and instrumentation, where it can be correctly logged and managed.

Delve into Acromag‘s selection of EMC Compliant RTD Input Temperature Transmitters. Each meticulously crafted to ensure impeccable performance in even the most demanding environments.

Click to explore our collection and find the transmitter that will revolutionise the way you handle temperature data.

Metromatics sell and support this product range in Australia. Finally, for more information, contact us.

RTD Temperature Transmitters


RTD Input Four Wire Dual Transmitter Model DT335 features:	Two Wire RTD / Resistance Input Transmitter TT231 features:	Single or Dual Channel , RTD Input, Loop Powered Transmitter 657T: Single RTD Input Channel / 658T: Dual RTD Input Channels
Dual Channels RTD (Pt, Ni, Cu) or 0-4500 ohm input 0-20mA, +/-10V Outputs 6-32V DC Local/Bus Power High Voltage Isolation for surges, noise, and ground loop errors	100 ohm Pt RTD or 0-900 ohm input In addition, 4-20mA Output (sink/source) 12-32V DC loop/local power USB configuration Operate over a wide temperature range with very low drift	100 ohm Pt, 120 ohm Ni, 10 ohm Cu (selectable type) input 4-20mA DC Output 12-50V DC from output loop power DIPS Switch configuration with push button calibration

Universal Input Temperature Transmitters Model 801T features:	RTD Input Temperature Transmitter with Loop Power Model ST131 features:	Isolated RTD Input, loop power two wire transmitter TT235 features:
0 to 20mA DC, 0 to 10V DC Output Mechanical relay (25V@5A) alarm 10-36V DC power Software configured In addition, performs linearization, square root extraction, optional limit alarm functions	100 ohm Pt RTD or 0-900 ohm input 4-20mA DC output 9-32V DC from output loop power USB configured Two wire transmitter	Selectable RTD or linear resistance input type or 0-500 ohm input 4-20mA output (sink/source) 12-32V DC loop/local power USB Configuration

Isolated RTD Input, DC local/bus power transmitter TT335 features:	Two Wire, Dual Transmitter with RTD / Resistance Input DT235 features:	Digital Panel Meter with Transmitter & Alarm functions VPM3000
Selectable RTD or linear resistance input type or 0-500 ohm input Universal Output source 12-32V DC local/bus power USB configuration	Dual channels Compatible with RTD inputs (Pt, Ni, Cu) and 0-4500 ohm inputs In addition, 4-20mA output capable of both sinking and sourcing Requires 7-32V DC loop power for operation	Large, vivid display for clear readability Compatible with various input types: 4-20mA, ±10V, thermocouple, RTD Offers multiple output options: 4-20mA, Modbus serial, alarm relay