High Resolution USB Solution – USB220

Eliminating the need for an analogue amplifiers, power supply and digital display equipment, the USB220 USB Load Cell Digital Amplifier works with SENSIT Test and Measurement software and allows users to monitor the actual output of the sensor in real time. Calculations are based on the calibration values stored in the on-board memory.

The FUTEK USB220 is a USB Load Cell Digital Amplifier.

Firstly, the module is supplied PC Power through a USB Cable, providing excitation voltage for the sensor. Then the analog output voltage of the sensor is digitized. It is then processed by a microprocessor which uses the integrated high resolution (24 bits) analog to digital converter (ADC).

The on-board USB transmitter and receiver device allow the microprocessor to communicate with the PC by the USB link. This easy plug and play solution with SENSIT Software provides the power to monitor the USB Load Cell interface output. It also allows measurement less affected by noise, temperature variation and excitation.

Finally for more information, contact us.

Other outstanding features includes:

  • USB 2.0 Communication Link
  • USB Bus Powered
  • Integrated Shunt Call
  • Input/Output Short Circuit Protection
  • Streaming ASCII Output
  • CE Criteria A Certification for Aerospace and Medical Grade Devices
  • Supports mV/V type sensors


USB Load Cell Digital Amplifier USB220


Output TypeInput TypeMounting TypeHeight in cmLength in cmWidth in cm

IP Rating


Display, USBmV/VInline2.67 cm6.07 cm0.86 cm



There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.